Italiano
Deutsch
Français
Hydrofinish and waterjet cutting
HYDROFINISH AND WATERJET CUTTING COMBINED SYSTEM
5 axis cutting system ±55°
with Hydro-Finish Device
with Hydro-Finish Device
CL 510/HF
| Net Cutting Area | X = 10’ Y = 6’ Z = 7” |
| Inner Table Working Area | 12’ x 7’ |
| Overall Dimensions | 15’ x 7' x h 6’ 1/2 |
| Rapid Speed | 0 - 100’ / min |
| Weight | 6.700 lb |
| Positioning Accuracy | ± 0,003” |
| Repeatibility | ± 0,002” |
| Ball Bar Ø 300 mm (12”) | ± 0,004” |
The equipment is able to cut all stone materials by an high pressure hydro-abrasive waterjet and to texture their surface by water only.
.jpg)
STANDARD AVAILABLE MODELS
| CL 44 | 4’ x 4’ |
| CL 510 | 11’ x 6’ |
| CL 610 | 11’ x 6’ 1/2 |
| CL 612 | 13’ x 6’ 1/2 |
| CL 620 | 20’ x 6’ 1/2 |
Need more information? Contact us now