 RESOURCES |
|
|
| News |
|
 |
| OPEN HOUSE 3-6/11/2009 IN FRANCE AT SCOMO DISTRIBUTOR |
|
|
Waterjet Corporation Srl will participate in the Open House planned on 3-6 November 2009 by our official distributor Scomo in France.
After the negotiation with the France colossus and after they bought a SUPREMA DX 612 machine with I.T.C. and 6.200 Bar KMT pump, we are studing harder and harder cooperation policies as for instance open houses or sector fairs.
The france one, which will last 4 days, will present the new machine extreme capacities and its different uses to the numerous existing customers and the pontential ones.
We wait for more than hundreds of customers from France, where Scomo is present with its capillary sales network.
Our Sales Manager Patric Jakobsson(patric@waterjet.it) will be there.
So the meeting point will be at Scomo facilities.
SCOMO 4, Rue Marius Terc้, 31300 Toulouse - 05 61 78 85 85
E-mail: service.contact@scomo.fr
www.scomo.fr
|
| |
 |
| |
| OPEN HOUSE 22-24/09/2009 IN HOLLAND AT TUWI DISTRIBUTOR |
|
|
Waterjet Corporation Srl will participate in the Open House planned on 22-23-24 September 2009 by our official distributor Tuwi in Holland.
After the negotiation with the Dutch colossus and after they bought a SUPREMA DX 510 machine with I.T.C. and 6.200 Bar KMT pump, we are studing harder and harder cooperation policies as for instance open houses or sector fairs.
The Dutch one, which will last 3 days, will present the new machine extreme capacities and its different uses to the numerous existing customers and the pontential ones.
We wait for more than hundreds of customers from Holland, Belgium, Luxembourg and Germany, where Tuwi is present with its capillary sales network.
Our Vice-President Dr. Eng. Massimo Russo and our Sales Manager Riccardo Costa (riccardo.costa@waterjet.it) will be there.
So the meeting point will be at Tuwi home.
Tuwi Nederland BV Address: Technopark 2 Postcode Plaats 7102 JM Winterswijk Telephone: 0543 549 549
Fax: 0543 549 501 E-mail: mail@tuwi.nl
www.tuwi.nl
|
| |
 |
| |
| WATERJET CORPORATION SRL, AN INDUSTRY LEADER SINCE 1991 IN THE FIELD OF HIGH PRESSURE WATERJET TECHNOLOGY, UNVEILS ITS LATEST RANGE OF HIGH-TECH WATERJET CUTTING MACHINES |
|
|
As a result of its strategic partnership with Mitsubishi and KMT, Waterjet Corporation continues to develop new machines, systems, patents and applications for use across a wide range of applications.
The SUPREMAฎ DX 510 (net cutting area 1.830 x 3.350mm with patented I.T.C. cutting compensation system) will be shown at EMO 2009. We will also present the EVOLUTION X5ฎ 612 (2.000 x 4.000 mm) with patented infinite 5-axis head rotation system.
Designed with ball screw movement for all axes and a structurally separate watertank, these machines guarantee the precision and accuracy required to produce high level mechanical parts.
|
| |
 Waterjet machines have the benefit of providing green technology for industries like aeronautics and precision mechanics, by preventing structural changes caused by heat and toxic emissions due to thermal cuts.
As a consequence of our partnership with KMT, Waterjet Corporation SRL has increased the performance of its intensifier pumps. Application capability has increased greatly by virtue of the introduction of the new 6200 bar / 90 000 psi pump (able to cut up to 300mm of Stainless Steel).
The CNC, motors and encoders are supplied by Mitsubishi Electric, which enable these mechanically accurate machines to achieve industry leading performances in terms of speed and accuracy of cut. Furthermore, the flexibility of this true industrial controller increases the applictions potential as for example adding a rotary axis in the tank for cutting round and square tubes.
|
| |
| WHY BUY A 6.200 BAR PUMP OVER A 4.130 BAR PUMP? |
|
|
Material 60x 48 2.0 thick Steel 1,500 lbs plate
Cut Length 1550.5
Abrasive 80 mesh
Pump KMT Streamline PRO (90,000 PSI)
Orifice/nozzle - .010/.030
Time estimate S-50 60,000 PSI 25.76 hours
Actual Cut Time Streamline PRO 90,000 PSI 10.5 HOURS
|
| |
Parameters:
ท Openings are straight within .003 total
ท Medium cut quality
ท Location within .003-.004
|
| |
| WATERJET CORPORATION, MITSUBISHI AND KMT JOINED TOGETHER FOR A WORLD WIDE SYNERGIE |
|
|
KMT H.P. PUMPS AT 4.130 BAR AND AT 6.200 BAR ULTRA HIGH PRESSURE
PUMP 4.130 BAR: high performances designed for the Mitsubishi CNC control
|
| |
 PUMP 6.200 BAR:
ADVANTAGES
Increase cutting power density by 83%
Possibility to cut materials with pure water only
ผ = 6 mm aluminum
1/8 = 3 mm titanium
Increase Max. cutting thickness
Titanium up to 10 = 250 mm
Steel up to 12 = 300 mm
Aluminum up to 16 = 400 mm
Increase cutting speeds: up to 250 % more
with identical abrasive mass flow rate
Reduced abrasive consumption: 30 % less
Reduction of groove zone area and increase of
cutting quality up to 3 times better with
identical cutting speed (less roughness degree)
Cutting harder material such as ceramics
|
| |
|
|
|
