-
PRATICA® FB510
Separate Tank and 3 and 5 axis Cnc Flying Bridge technology with ball screws transmissions and automatic lubricating system
-
-
CLASSICA® CL 510
Compact high performance Waterjet Cutting Machine studied for an easy operation and built with high quality commercial components suitable for any standard 2D cutting job application
-
-
SUPREMA® DX 510
The I.T.CTM System corrects for taper and achieves wall straightness and the highest possible cutting speeds, by compensating through CNC the inclination (up to 2°) and orientation of the high pressure water jet. This ensures a high quality part at a low cost.
During the I.T.C™ compensation, the Jet is also directed towards the piece in order to reduce the Tail Delay effect and the acceleration-deceleration ramp times in the corners, for faster and more economical cutting cycles.
The WaterCad-CamTM Software generates the I.T.CTM Program just by a few Clicks
-
-
EVOLUTION X5® 510
The five axis Evolution 3D cutting system operates automatically by maintaining a constant distance from the nozzle to the material, even during rotation and interpolation up to ± 69° (optional 90°). This is also possible by a 3D program to interpolate all the axes simultaneously.
-
-
WATERSTONE™
High pressure water jet texturing machines for all stone materials.
-
-
BRUSHSTONE™
The innovative compact system for brushing and bush-hammering any kind of stone materials before or after a superficial texturing.
-
-
QUARRYJET™
The quarryjet™ technology permits to cut the quarry by an high pressure water jet system (4.130 bar - 60.000 psi) that ejected through a gauged orifice at three times the speed of sound, can realize by a patent device 6 cm. (2,4") Width cut by 7 mt (23') horizontal and vertical depth: the system is developed also to work inside galleries up to 5 mt (17') height able to remove the stone materials by blocks to be used for other purposes.
-
Special machines
Pre-Owned machines
News
Multimedia
Company - Contact
Special Offers
Powered by MITSUBISHI ELECTRIC CNC
QUARRYJET™ QJ-100
| The quarryjet™ technology permits to cut the quarry by an high pressure water jet system (4.130 bar – 60.000 psi) that ejected through a gauged orifice at three times the speed of sound, can realize by a patent device 6 cm. (2,4”) Width cut by 7 mt (23') horizontal and vertical depth: the system is developed also to work inside galleries up to 5 mt (17') height able to remove the stone materials by blocks to be used for other purposes. | |||||||||||||||
|
The machine is composed by: • Movable system on multiple 3 mt (10') rails • Control Inside Room on the movable system • High pressure nozzle • Unique 7 mt. (23') lenght cutting lance • Rapid fixing system for vertical and horizontal cutting • Nozzle oscillating Patented System Mod. Quiz-Jet™ • High Pressure 75 kW Pump • Softener and filtration system |
|
||||||||||||||
Tecnical data.
|
100 Hp High pressure double intensifier pump (4.130 Bar = 60.000 PSI) separated from the rails movable system |
||||||||||||||
  |
|||||||||||||||
 |
|||||||||||||||
1 MQ/H