Client Area 
Waterjet - High-Pressure Waterjet Pump
Menu   Show Menu
Video  
Information Request  
 
 
 
KMT H.P. TECHNOLOGY 4.130 Bar = 60.000 PSI
STRAMLINE™ SLV-V PUMP 30 - 50
 
Model Power Water Consumption Orifice Size N. Heads
30 30 HP 0,7 gal/min - 2,8 lt/min 0,010' - 0,25 mm 1
50 50 HP 0,9 gal/min - 3,8 lt/min 0,014'' - 0,35 mm 1 - 2
 
KMT STREAMLINETM SLV-V High-Pressure Waterjet Pump System
with Extended life single intensifier
 
High pressure Waterjet pumps sistem
   
STREAMLINE™ SLV-V PUMPS 30 - 50





•   Ceramic Plungers
•   Dual Pressure Control
•   Working Pressure: 4.000 Bar = 58.000 PSI
•   Design Pressure: 4.130 Bar = 60.000 PSI
•   Attenuator
 
 
KMTULTRA H.P. TECHNOLOGY 6.200 Bar = 90.000 PSI
STREAMLINE™ PRO II PUMP 60 - 125
 
 
Model Power Water Consumption Orifice Size N. Heads
60 PRO II 60 HP 0,61 gal/min - 2,5 lt/min 0,010'' - 0,25 mm 1 - 2
125 PRO II 125 HP 1,37 gal/min - 5,5 lt/min 0,014'' - 0,35 mm 1 - 2 - 4
 
 
ADVANTAGES

•   Increase from 3 to 4 Mach Speed the supersonic Jet

•   Increase cutting power density by 83%

•   Possibility to cut materials with pure water only
     1/4" = 6 mm aluminum
     1/8" = 3 mm titanium

•   Increase Max. cutting thickness
    Titanium up to 10" = 250 mm
    Steel up to 12" = 300 mm
    Aluminum up to 16" = 400 mm

•   Increase cutting speeds: up to 250 % more
    with identical abrasive mass flow rate

•   Reduced abrasive consumption: 30 % less

•   Reduction of groove zone area and increase
    of cutting quality up to 3 times better with
    identical cutting speed (less roughness degree)

•   Cutting harder material such as ceramics

Courtesy of "U.H.P. Tech"




300 mm thick
ALUMINIUM
100 mm (4") Carbon Steel







6 mm thick
ALUMINIUM cut with
PURE WATER ONLY
 
STREAMLINE™ PRO II PUMP 60 - 125



•   Electronic Pressure Control
•   Working Pressure: 6.200 Bar = 90.000 PSI
•   Design Pressure: 6.600 Bar = 96.000 PSI
•   Attenuator Volume: 2 lt = 1/2 gal