SUPREMA DX 510 - 4 AXIS SYSTEM WITH I.T.C.TECHNOLOGY

SUPREMA DX510 2016
 



SUPREMA DX 510 - 5 AXIS 2D "EDGE
 5™" OPTION WITH I.T.C.™ TECNOLOGY

SUPREMA DX510 X2 2016

DX 510 5 - AXIS (X2)
X = 3.350 mm
Y = 1.600 mm
Z = 180 mm
A=± 55°
C= 
± 55°
Net Cutting Area
X = 11'
Y = 5'
Z = 7"
A=± 55°
C= 
± 55°
3.600 mm x 1.850 mm Inner Table Working Area 12' x 6'
4.800 mm x 2.300 mm
x h 1.800 mm
Overall Dimensions 16' x 7' 1/2 x
h 6'
0 - 20 mt / min Rapid Speed 0 - 67' / min
5.000 Kg Weight 11.000 Ib
± 0,05 mm Position Accuracy ± 0,002"
± 0,025 mm Repeatibility ± 0,001"
± 0,05 mm Ball Bar Ø 300 mm ± 0,002"

5 axis 2D "Edge 5™" option with I.T.C™ Technology, Touch Probe, Laser Pointer and Vacuum Assist. 
Separate Stainless Steel Tank and Ball Screw motion system with automatic lubrication

 


 
4 AXIS I.T.C. TECHNOLOGY (INTELLIGENT TAPER CONTROL)
 
EU Patent N. DE 20 2007 012 572 U1



With ITC






Without ITC

I.T.C™
The I.T.C.™ System compensates for the natural taper that is produced by the water jet while cutting. The I.T.C.™ enables the operator to enhance the squareness of the cut material, top to bottom, while allowing highest possible cutting feed rates. The water jet position is compensated up to 2 degrees, via the NC control of the motion system. This ensures a high quality part at low cost.

During the I.T.C.™ compensation, the jet is also directed towards the piece in order to reduce the "Tail Delay" effect as well as the accelleration-deceleration ramp times around the corners, for faster and more economical cutting cycles.

 

SUPREMA DX 510 - 5 AXIS 3D SYSTEM

SUPREMA DX510 X3 2016
DX 510 5 - AXIS (X3)
X = 3.350 mm
Y = 1.500 mm
Z = 300 mm
A=± 69° (± 90°)
C=infinite (optional)
Net Cutting Area
X = 11'
Y = 5'
Z = 12"
A=± 69° (± 90°)
C=infinite (optional)

3.600 mm x 1.850 mm Inner Table Working Area 12' x 6'
5.000 mm x 2.300 mm
x h 2.100 mm
Overall Dimensions 17' x 7' 1/2 x
h 7'
0 - 20 mt / min Rapid Speed 0 - 67' / min
5.500 Kg Weight 12.000 Ib
± 0,05 mm Position Accuracy ± 0,002"
± 0,025 mm Repeatibility ± 0,001"
± 0,05 mm Ball Bar Ø 300 mm ± 0,002"


5 axis 3D with integrated I.T.C™ Technology, 
Separate Stainless Steel Tank and Ball Screw motion system with automatic lubrication











SUPREMA DXD - SPECIAL CUSTOMIZED MACHINES

SUPREMA DXD 1240
 

Special customized machines: single or double bridge, with multiple heads

WJ E PLASMA
WATERJET AND PLASMAJET HEADS (OPTION)
Double independent motorized Axis for Waterjet or Plasma  
 
X = 4.000 mm
Y = 12.200 mm
Z = 180 mm
Net Cutting Area
X = 13'
Y = 40'
Z = 7"
4.500 mm x 12.800 mm Inner Table Working Area 15' x 42'
5.700 mm x 15.000 mm
x h 2.100 mm
Overall Dimensions 18' x 50' x
h 7'
0 - 30 mt / min Rapid Speed 0 - 100' / min
12.000 Kg Weight 26.000 Ib
± 0,08 mm Position Accuracy ± 0,003"
± 0,05 mm Repeatibility ± 0,002"
± 0,08 mm Ball Bar Ø 300 mm ± 0,003"





SUPREMA MODELS 2016

This site uses cookies to manage, improve and personalize your browsing experience of the website.
For more information about how we use cookies and how to remove them, consult our policy on cookies.
For permission to use cookies on this site click the button "OK".
OK