Accurate Waterjet Flying Bridge System
The cutting system has the following characteristics:
►separate steel tank,
► reinforced Flying Bridge system that allows easy loading / unloading of materials on the three free sides,
► ball screws motion system with automatic lubrication,
► 3 axes NC,
► integrated electrical cabinet,
► combinable with a wide choice of optional accessories (e.g. rotating bridge, loading / unloading system, etc.).
►separate steel tank,
► reinforced Flying Bridge system that allows easy loading / unloading of materials on the three free sides,
► ball screws motion system with automatic lubrication,
► 3 axes NC,
► integrated electrical cabinet,
► combinable with a wide choice of optional accessories (e.g. rotating bridge, loading / unloading system, etc.).

WATERJET PRATICA - FB 510
Net Cutting Area | X = 3.000 mm (10') Y = 2.000 mm (6' 1/2) Z = 200 mm (8") |
Inner Table Working Area | 3.650 mm x 2.240 mm (12' x 7' 1/2) |
Overall Dimensions | 4.200 mm x 3.000 mm x h 1.800 mm (14' x 10' x h 6' 1/2) |
Rapid Speed | 0 - 12 mt / min (0 - 40' / min) |
Weight | 3.000 Kg (7.500 lb) |
Positioning Accuracy | ± 0,075 mm (± 0,003") |
Repeatability | ± 0,05 mm (± 0,002") |
Ball Bar Ø 300 mm (12”) | ± 0,075 mm (± 0,003") |
STANDARD AVAILABLE MODELS
FB 510 | 3.000 x 2.000 mm (10' x 6'1/2) |
FB 612 | 4.000 x 2.000 mm (13' x 6' 1/2) |
FB 812 | 4.000 x 2.500 mm (13' x 8') |
FB 620 | 6.100 x 2.000 mm (20' x 6' 1/2) |
FB 820 | 6.100 x 2.500 mm (20' x 8') |