Italiano
Deutsch
Français
DOUBLE BRIDGE WATERJET CUTTING MACHINE
Double bridge waterjet system
The cutting system has the following characteristics:
► stainless steel tank,
► 3-4-5 axis CNC,
► reinforced DOUBLE BRIDGE technology that allows to perform different processes at the same time, using a double channel NC,
► helical rack and pinion motion system and automatic lubrication,
► possibility of increasing productivity by adding cutting heads.
► stainless steel tank,
► 3-4-5 axis CNC,
► reinforced DOUBLE BRIDGE technology that allows to perform different processes at the same time, using a double channel NC,
► helical rack and pinion motion system and automatic lubrication,
► possibility of increasing productivity by adding cutting heads.
WATERJET CLASSICA - CLD 510
| Net Cutting Area | X = 2.000 mm (6' 1/2') Y = 3.000 mm (10') Z = 200 mm (8') |
| Inner Table Working Area | 2.300 mm x 4.400 mm (7’ 1/2 x 15') |
| Overall Dimensions | 4.500 mm x 2.300 mm x h 1.800 mm (15’ x 7 1/2 x h 6’) |
| Rapid Speed | 0 - 30 mt / min (0 - 100’ / min) |
| Weight | 4.000 Kg (8.900 lb) |
| Positioning Accuracy | ± 0,075 mm (± 0,003”) |
| Repeatability | ± 0,05 mm (± 0,002”) |
| Ball Bar Ø 300 mm (12”) | ± 0,075 mm (± 0,003”) |
EDGE 5 axis ±55°con I.T.C (Intelligent Tapering Control) technology and exclusive Touch Wave™ sensor for accurate continuous position calibration.
